GPS TRACKER USER MANUAL
REFACE
Thank you for purchasing GPS tracker. This manual shows how to operate the device smoothly in details, please make sure to read this manual carefully before using the device. Please be noted that any update of the manual is made without prior notice. Each time the update of the manual will be released in the latest product sales. The manufacturer won’t assume any legal responsibility for any errors or omissions made in this manual.
1 SUMMARY
Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP and Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.
Specifications
| Content | Specs. |
| Dim. | 68mm x 37mm x14mm |
| Weight | 40g |
| Network | GSM/GPRS |
| Band | 850/900/1800/1900Mhz |
| GPS sensitivity | -159dBm |
| GPS accuracy | 5m |
| Work voltage | 9V-100v |
| Time To First Fix | Cold status 45s
Warm status 35s Hot status 1s |
| Storage Temp. | -40°C to +85°C |
| Operation Temp. | -20°C to +55°C |
| Humidity | 5%–95% non-condensing |
- GSM quad-band frequency;
- Real time tracking by SMS/GPRS;
- Overspeed alarm ;
- ACC alarm
- move alarm
- Cut vehicle oil or circuit (optional).
- Add ACC ignition and flameout inform (optional)
- Add Built-in backup battery to realize power failure alarm( optional)
- Add voltage 9-90V
- Add waterproof and dust proof
- Add add vibration alarm
- Add switch gprs mode and sms mode
- Add AGPS function,receive GPS signals faster
Hardware Description
-
- device front side towards the sky. When install in car, if the windscreen glued by metal thermal insulation layer or heating layer, it will reduce the GPS receive signal and lead to GPS work disorder.
The GPS tracker must be installed by professional personnel
| INDICATOR LIGHT STATUS | MEANING |
| green light -Solid | GSM signal connection |
| green light -Flash | NO GSM connection |
| Blue light -Solid | GPS signal connection |
| Blue light -Flash | No GPS or searching gps signal |
Note: All leds will turn off after 10 minutes for best hide.if you call the device mobile number,so the led will turn on work again. Connect 12V-36 v voltage of the power supply
Notices:
- GPS tracking can be worked outdoor. Must have a mobile phone signal and have GPS singal, can block GPS satellite signal when there are metal and building above the GPS tracker
- Please make sure GSM SIM card(2G GSM network or compatibility 2G GSM network) supports making calls, sending messages, GPRS network.
- Please make sure GSM SIM card is with sufficient balance.
- Please make sure the GSM card has opened the call shows and turned off the call transfer.
- Please insert the GSM phone card correctly. Cancel the PIN code
- Do not assembly and disassembly device at will.
Quick using
- Open the rubber cover, insert the SIM card to the slot.
- turn on small switch to “ON” place.
- Put device outdoor ,connect to power supply 9V/36V ,
- Dialing device number, it will hang up and receive Google Maps link of position, or sending message “smslink123456” to mobile number in tracker
SMS Command instruction
NOTE:
- Device default password:123456)
- use of mobile phones send messages to the tracker about all set command
- The “+” in the command, please don’t type “+”, space means press the space keyboard on your cell phone
- After admin number setting, all alarm message will send authorization number other cell-phone number send command will not reply
- If you want standby time longer, pls don’t open move alarm, and platform for real-time location tracking.etc
- The default mode is “GPRS”, Send SMS “sms+password” to the tracker, and it
will reply “sms ok!”close GPRS mode, replace SIM mode
-
- Call the mobile number in tracker, you will receive a Google Maps link of position, or sending message “smslink123456” to SIM card in tracker .
EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Pic（1）have gps signal Pic(2)no gps signal
Pic 1：Replied real-time tracking information under GPS satellites signal.
-
-
- Lat:22.67533 lon:114.03913 Positioning of the latitude and longitude values.
- Spd：000.3 This refers to the device moving speed. The unit is km/h.
- T:06/14/17 09:14 real-tracking time, the Default is London time. You can set a time zone by sms command
-
Google Link: This is the link to the Google map showing the position of the device.
Pic 2：Replied LBS information without GPS satellites signal.
-
-
- smcc:27a4 1223: Real-time LBS data.
- Time:08/00/00 LBS positioning time.
-
If you receive positioning information is picture 2, please go out the outdoor and
Walk around with gps tracker,for receive The satellite signal
-
- Admin number setting (support 5pcs admin number )
Command: admin123456+space+ phone number（This phone number is your own mobile phone number , not the SIM card number in tracker .）
Reply：admin ok E.g：admin123456 13725556021
Note: support 5pcs admin number , Set the first authorization number,then use use the first authorization number to set other authorization number,
If the authorization number forget or lost, you can send reset123456 to Restore the factory Settings
Admin number Canceling:
Command ：noadmin123456 13725556021 Reply：noadmin ok
-
- Over-speed Alarm setting（It works only in continuous positioning mode.） Over-speed Alarm setting:
Command ：speed123456+space+ speed（Suppose speed is 70km/h）note: not
less 60KM/H Reply：speed ok E.g：
When the unit speed is over 70km/h, it will send message “speed alarm!” to the
admin number .
Over-speed Alarm canceling ： Command ：nospeed123456 Reply：nospeed ok
-
- move Alarm setting (It works only in getting gps signal, the scope is a circle that radius 200meters)
Command：move123456 Reply：move ok
E.g：
move alarm Canceling: Command：nomove123456 Reply：nomove ok
-
- Terminal (local) Time Setting(factory setting GMT 0)
Command：time +space+zone123456+space +local time zone Reply：time ok!
E.g： time zone123456 1
NOTE:( 1 is east 1,
– 1 is west 1,
30 is half the time zone)
-
- cut Power alarm(option, The default do not have this function)
If device have built-in battery.it will send alarm after the power failure, This function activates by default
-
- Low battery alarm (option, The default do not have this function)
This function activates by default.it will send alarm once battery lower than 30% leve of full power
canceling low battery alarm
Command :“lowbattery+password+space+off”
set effective send SMS “lowbattery+password+space+on”
Set Vibation alarm (built-in g-sensor)
Command: “shock+password” (After 5mins of static , device is vibration and will
send send Vibrate alarm+latitude&longitude to admin number”)
Reply: set vibrate ok
canceling Vibation alarm:
Command: “noshock+password” Reply: no vibrate alarm ok
ACC working alarm
-
-
- send “ACC+password” to tracker to turn on ACC function(tracker will report the Acc status)
-
E.g：
Canceling ACC function
6.0 Cut off the Oil and Power Setting (option, The default do not have this function)
- Command: cut+password (it will be executed and stop the car when the speed is less than 20KM/H)
Reply : stop engine succee E.g
resume the Oil and Power System
Command: resume+password Reply : resume engine succeed E.g
device to restart
Command: reboot123456
Reply: after 20s will reboot ok! E.G
change Time upload interval( default 10s)
Command：fix010s***n123456 Reply: t010***n ok
(010 s is every 10 seconds send data to platform)
Change the password
Command: password123456+space+new password Reply :password OK
Note: 123456 is the old password(default ),888888 is the new password,it must the 6 digits Arabic numerals
Restore the factory Settings
Command：reset123456
Reply：supervisor instruction setting Factory, ok!
check device parameter
Command: check123456
Reply : device parameter
change IMEI number
Command: setimei123456+space +new imei number
E.G: setimei123456 352887076633221
If you need real-time tracking by APP or websit ,pls Operating as follows
NOTE:If you need platform position, turn on GPRS model(GPRS model by default)
-
- :Suport Andriod & IOS APP tracking
If you need real-time tracking by APP ,please scan APP on web platform OR Download “dagps”
1).scan QR code—open with browser— choose Android or iphone—Download– installation app
: support Website tracking
Open www.gps110.org
Use IMEI login, default password 123456.
PC login APP login
NOTE:If you insert the correct SIM card and open GPRS, device in outdoor, still not online.Please set the APN commands
SMS1: APN123456+space+Apn name ( APN name pls ask the sim card company ,for example tell you the apn name is ABC,so send APN123456 ABC)
If have the APN user name and password, need plus APN user name and password behind the APN name) Eg:APN123456+space+APNname+space+APNuser name+space+ APNpassword If device online in platefrom, no need set apn commands
- If use the other platform, start on line tracker(Use the default platform, don’t need to operate 7)
in advance Using mobile phone send SMS commands to device and set online platform (please set DNS and port,set apn)
SMS1: adminip123456 +space+ip+space+port
or adminip123456+space +DNS+space+ port
E.g: adminip123456 www.gps110.org 7018(www.gps110.org is DNS,7018 is port)
SMS2: APN123456+space+Apn name (APN name pls ask the sim card company ,for example tell you the apn name is ABC,so send APN123456 ABC)
If have the APN user name and password, need plus APN user name and password behind the APN name) Eg:APN123456+space+APNname+space+APNuser name+space+ APNpassword
If device online in platefrom, no need set apn commands
- FAQ and processing methods.
| FAQ | Instructions/Solutions |
| Fail to turn it on | Please check if connect to power supply 9V/36V and red light if
Solid |
| No GSM signal | Please check if SIM card installed correctly and have money, if there a mobile phone GSM signal
And have to mobile phone signal |
| No GPS | A more open view of the sky is recommended to make sure the device can receive the GPS signal normally.in outdoor and take
device to walk around |
| No reply to SMS
command |
Password wrong or the format is wrong. restore factory settings send
messages “reset123456” |
| No reply to calling
& No alarm |
Authorized / admin phone number is incorrect or has not set up |
| SMS position OK, cannot the APP and web platform | Pls check if APN is correctly set. And set the correct APN |
| Platform position is difference and the actual position. | position time don’t update or no GPS signal: call the device phone number and receive the position message. If it shows like Pic 2, pls make sure the device can receive the GPS signal normally.in
outdoor,and take device to walk around, make sure sim normal |
